The Image MASSter™ Solo-4 IT High Speed Hand-Held Duplicator allows the copying of one to up to three drives or two source drives to two target drives at full SATA-2 speed. Unit features SAS, SATA, IDE, USB and e-SATA support. Built-in 1 Gigabit Ethernet connection for uploading and downloading images to SAN.

 

 Don't Miss Out! Toys4techies.com offers completely secure transactions and credit card approval directly through our Merchant service.

Features

• Extreme Speed Built for Today's and Tomorrow's Hard Drive Technology: Built to work with the fastest  hard drives available, Solo-4 duplicates, authenticates and sanitizes at SATA-2 speed (18 GB/min top capability). This technology not only allows the unit to take advantage of today's fastest hard drive speeds but also allows the user to be prepared for tomorrow's future hard drive speed improvements.
   
• One side Protected "Source" Port: For the protection of the user's original images, the unit provides one standard write protected native SATA/SAS "Source" port and one standard write protected native USB 2.0 "Source" port for the duplication of up to three "Target" drives. IDE Adapter included.
  
   
• Multiple "Target" Ports: provides three native SATA/SAS "Target" ports and three USB 2.0 "Target" ports to allow the user to make up to three copies of a single drive. One "Target" of the target ports can be configured by the user as an optional write protected "Source" port to allow the single copying of 2 different "Source" drives to two individual "Target" drives simultaneously
• On the fly" Drive Image Encryption: Built-in DiskCypher technology allows the full encryption (AES 192/256) of Drive Images. The process is done without speed degradation during the duplication process.
  
   
• Windows XP Operating System: Solo-4 runs on the highly stable and proven Windows XP Operating System. Unit can be customized to individual organization needs upon request.
• Drive Wiping: Supports single pass or full DoD Sanitization.
  
   
• Multiple Hash Verifications: SHA-1, SHA-2, MD-5 of the "Source" Hard Drive and DD Images
  
   
• Uploads "Source" Images to Network Storage: Solo-4  uploads "Source" Data Images to Networked Storage Area using 1 Gigabit Ethernet Connection for the purpose of processing and archiving images.
  
   
• Preview Data directly on the unit: Preview active files on the "Source" Drive utilizing Windows XP file viewers.
  
  
  
   

Software         

The following Software features come standard with the IM Solo-4 Forensic unit:
 

• Device Configuration Overlay (DCO) : DCO can be used to hide and protect a portion of the drive’s area from the operating system and file system.  If DCO is detected on a Suspect’s drive, the IM Solo-3 Forensic's seizure operation will capture the DCO hidden sectors.
   
• Host Protected Area (HPA) : An HPA area may exist on a drive, hiding a certain portion of the drive’s contents from the operating system and file system.  If an HPA area exists on a Suspect’s drive, the IM Solo-3 Forensic's seizure operation will detect and capture data from the HPA area.
   
• WipeOut DoD : WipeOut was designed to meet the U.S. Department of Defense specification DOD 5220-22M regarding the sanitization of hard disk drive data.  Three iterations are performed to completely erase data and the contents of a hard disk drive.  Each iteration makes two write passes over the entire drive.
   
• WipeOut Fast : The WipeOut Fast option provides a quick non-DoD method of sanitizing a drive of all previously stored data.
   
• "On the fly" Drive Image Encryption: Built-in DiskCypher software allows the encryption of "Evidence" Images during the acquisiton phase.
   

Optional Software      

•  Linux-IQCopy - The Linux-IQCopy Option adds IQCopy support for the Linux Extended 2 (EXT2) and Extended 3 (EXT3) File Systems. The Linux Extended 2 and Extended 3 (EXT2/EXT3) File Systems are the most common File Systems used by Linux users. 
   

No Shipping Charges on All Optional Hardware purchased with the

ImageMASSter Solo 4 IT Super Kit

Optional Hardware

• Drive Tray & Fan - For Cooling and EMI shielding.

• Micro S-ATA 3.3 V Adapter - For Micro S-ATA drives.

• SAS to IDE Adapter - Convert the unit's native SAS interface to IDE interface.

• Hard Case
   

Email sales@toys4techies.com for price quotes on all Optional Items.

Specifications            

• Supply Voltage: 100 - 240V / 50 - 60 Hz 400Watt Universal Auto switching input voltage
• Power Consumption: 9W
• Operating Temperature: 5 degrees - 55 degrees C
• Relative Humidity: 20% - 60% non-condensing
• Net Weight: 5.35 lbs
• Overall Dimensions: 10.6" W x 3.8" H x 7.7"D ( 270 x 98 x 194 mm)

"IN THE BOX"

Solo-4 Expansion Ready Stand Alone Unit with:
4 SAS Data Cables and Power cables
1 IDE to SAS Adapter
1 IDE Power Cable
1 IDE Data Cable
1 2.5” Drive Adapter
1 2.5" power Cable
1 PS 150watt
1 Power Cord
1 Touch Pen
1 User Guide
Expansion Box with all included accessories:
mini mouse
Mini Keyboard
12 in 1 card reader
Mini hub 2.0 4 PORTS
Mini Speakers with Jack
Headphones
WiFi USB 2.0
eDVD
LinkMASSter Option with Belikin and 6" cross Cable
LinkMASSter MAC Option
Plus
Hard Case

Please email us at sales@toys4techies.com for a comprehensive PDF data sheet on the

ImageMASSter Solo 4 IT Super Kit

We Accept the following credit cards. We also accept PayPal. Government Contracts also accepted. Please email us for Cage Code and DUNS Information

Important Shipping Note : This item ships for FREE within the Continental USA . No additional shipping charges for accessories purchased and shipped with this item. All International Customers please email for Lowest Rate shipping costs. All International Buyers pay Only Verifiable Shipping Charges, No handling Fees. We shop around for shipping to save you money!

sales@toys4techies.com